Maxa Beam Filters

FILTERS

MAXA BEAM

AMBER FILTER
P/N: MBA-1500
For use in fog or smoke. The filter is securely mounted in a copolymer ring that attaches over the front window assembly. The ring is held in place by a positive locking technique that requires no tools and is easy to install or remove in seconds.
Weight: 0.4 lbs. Diameter: 6.0” Width: 0.6”

715nm SEMI-COVERT IR FILTER
P/N: MBA-1715
For use in a semi-covert situation and is visible to the naked eye. Maximum range is 2500m. The filter is securely mounted in a copolymer ring that attaches over the front window assembly. The ring is held in place by a positive locking technique that requires no tools and is easy to install or remove in seconds.
Weight: 0.4 lbs. Diameter: 6.0” Width: 0.6”

850nm COVERT IR FILTER
P/N: MBA-1850
NSN: 6230-01-393-1816
For use in a covert situation and is visible only if bore-sited with beam. Maximum range is 1200m. Provides excellent IR illumination when using night vision binoculars and monoculars. The filter is securely mounted in a copolymer ring that attaches over the front window assembly. The ring is held in place by a positive locking technique that requires no tools and is easy to install or remove in seconds.
Weight: 0.4 lbs. Diameter: 6.0” Width: 0.6”

900nm FULLY COVERT IR FILTER
P/N: MBA-1900
For use in a covert situation and virtually undetectable to the naked eye. Maximum Range is 500m. The filter is securely mounted in a copolymer ring that attaches over the front window assembly. The ring is held in place by a positive locking technique that requires no tools and is easy to install or remove in seconds.
Weight: 0.4 lbs. Diameter: 6.0” Width: 0.6”

950nm ULTRA COVERT IR FILTER
P/N: MBA-1950
For use in a covert situation and is undetectable to the naked eye. Maximum Range is 250m. The filter is securely mounted in a copolymer ring that attaches over the front window assembly. The ring is held in place by a positive locking technique that requires no tools and is easy to install or remove in seconds.
Weight: 0.4 lbs. Diameter: 6.0” Width: 0.6”

PROTECTIVE LENS
P/N: MBA-2005
Gives the front lens on the Maxa Beam Searchlight extra protection.
Weight: 0.4 lbs. Diameter: 6.0” Width: 0.6”

FULL DIFFUSION FILTER
P/N: MBA-3000
Provides an evenly lit field of light when the searchlight is in the flood or spot position. Useful for temporary site lighting and short range search applications. See MBA-3075 for use with IR.
Weight: 0.4 lbs. Diameter: 6.0” Width: 6.0”

COLLIMATING LENS
P/N: MBA-3015
The MBA-3015 Collimating Lens eliminates the center dark area of the beam when the Maxa Beam is flooded out to 40 degrees. It collimates the beam of light and redirects spill light back into the beam. This differs from the MBA-3000 Diffusion Filter because it focuses the excess light inward rather than diffusing the light outward, making the collimating lens a better choice for longer range use of the light in flood mode. The collimating lens is recommended for general applications when using the light in flood mode.
Weight: 0.5 lbs. Diameter: 6.0” Width: 6.0”

PERIPHERAL VISION DIFFUSION FILTER
P/N: MBA-3020
Provides a hot center beam with a wide band of light extending to either side. Useful in search applications.
Weight: 0.4 lbs. Diameter: 6.0” Width: 6.0”

FILTER STACKING ADAPTER
P/N: MBA-3075
Allows any filter to be stacked on a MBA-3075 adapted filter (except for the MBA-2143 and MBA-2150 Sharp Cut-Off Filters). Please note that this adapter replaces the regular filter rings on a filter and is installed at the factory.
Weight: 0.2 lbs. Length: 6.0” Width: 6.0” Height: 1.0”

FILTER POUCH
P/N: MBA-6100
Made of heavy duty nylon material, padded, with velcro cover. It fits any of the Maxa Beam filters for the searchlight and can be attached to the battery carry strap or a belt.
Weight: 0.1 lbs. Length: 7.5” Width: 6.5”
Thickness: 0.75”