NiCad Drop-in Trickle Charger
recharges a MBP-1207 NiCad Pack within 24 hours.
Disconnecting the searchlight from the battery
is not required. Ideal for emergency standby
use or where rapid charging is not required.
110/220 VAC (switchable). For use only with MBP-1207. Recharge
time AC 18 hrs, no DC.
Weight: 2.2lbs. Length: 8.0” Width:
5.75” Height: 2.5” |
Same operation as the MBP-3100, except plugs directly
into battery case or belt pack (no drop-in tray
included). For
use with MBP-1207 or MBP-1207N-B.
Weight: 1.5 lbs.
Length: 2.12” Width:
2.0” Height: 3.0” |
The Direct Power Supply converts 110/240v AC
to 12v DC at 10 amps to power searchlight.
Unit
has standard 3 prong US AC plug. Searchlight
plugs
into unit with any of the power cords
we offer.
Weight: 2.5 lbs. Length: 7.0” Width:
4.0” Height: 2.5” |
|
The Direct Drive
Converter converts 24v DC to 12v DC at 10 amps
to power searchlight. Ideal for boats or other
vehicles that have 24v power onboard. Unit
has a cord with bare ends that can be wired
directly to 24v DC source or to a plug. Ask
factory about special orders with certain types
of plugs installed at factory. Unit can be
attached or detached from the searchlight in
seconds and includes a short cord that plugs
into searchlight. Weight: 2.0 lbs. Length:
6.75” Width: 5.0” Height: 3.5” |
|
Charges Ni-Cad and Li-Ion and Ni-MH batteries.
Has a 3 Amp 100/240 VAC 50/60 Hz automatic sensing
AC adapter (MBP-5003). Is capable of operating
from 11-36 VDC and charges any MBP-1200 series
battery in 2.5 hours. Has drop-in continuous maintenance
charging that will keep the battery fully charged
indefinitely. Also has a conditioning cycle that
automatically discharges the battery before charging
it. Note: The MBP-5200 is a battery charger only,
the MBP-5600 has the additional capability to power
the Maxa Beam Searchlight.
Weight: 3.5 lbs. Length:
7.5” Width: 4.5” Height: 1.87” |
Charges Ni-Cad and Li-Ion batteries.
Has a 3 Amp 100/240 VAC 50/60 Hz automatic
sensing AC adapter (MBP-5003), fused vehicle
adapter (MBP-5230), safety strap, and surface
mounting brackets for mounting on the floor
or dashboard of a vehicle. Will charge battery
on either an AC or an 11-36V DC source. Capable
of charging any MBP-1200 series battery in
2.5 hours. It also has drop-in continuous maintenance
charging that will keep the battery fully charged
indefinitely. It also has a conditioning cycle
that automatically discharges the battery before
charging it. The MBP-5200-M is a battery charger
only, and has the additional capability
to power the Maxa Beam Searchlight.
Weight:
4.0 lbs. Length: 7.5” Width: 4.5” Height:
1.87” |
|
Charges Ni-Cad and Li-Ion batteries.
This “DC only” version comes with
fused vehicle adapter (MBA-5230), safety strap,
and surface mounting brackets for mounting
on the floor or dashboard of a vehicle. Will
charge battery on an 11-36V DC source and is
capable of charging any MBP-1200 series Battery
in 2.5 hours. Has drop-in continuous maintenance
charging that will keep the Battery fully charged
indefinitely. Also has a conditioning cycle
that automatically discharges the battery before
charging it. The MBP-5200-D is a battery charger
only, and has the additional capability
to power the Maxa Beam Searchlight.
Weight:
2.6 lbs. Length: 7.5” Width: 4.5” Height:
1.87” |
|
Charges Ni-Cad and Li-Ion and Ni-MH batteries
and has the ability to power the Maxa Beam
Searchlight. This version comes with a 10 Amp
100/240 VAC 50/60 Hz automatic sensing AC adapter
(MBP-5010) and is capable of powering the light
or charge any MBP-1200 series battery in 2.5
hours from an AC power source. Has drop-in
continuous maintenance charging that will keep
the battery fully charged indefinitely. Also
has a conditioning cycle that automatically
discharges the battery before charging it.
Weight: 4.5 lbs. Length: 7.5” Width:
4.5” Height: 1.87” |
|
Charges Ni-Cad and Li-Ion batteries
and can power the Maxa Beam Searchlight. This
version comes with a 10 Amp 100/240 VAC 50/60
Hz automatic sensing AC adapter (MBP-5010),
fused vehicle adapter (MBP-5630), safety strap,
and surface mounting brackets for mounting
on the floor or dashboard of a vehicle. Will
charge any MBP-1200 series battery in 2.5 hours
or power light on either an AC or an 11-36V
DC source. It also has drop-in continuous maintenance
charging that will keep the battery fully charged
indefinitely. It also has a conditioning cycle
that automatically discharges the battery before
charging it.
Weight: 5.2 lbs. Length: 7.5” Width:
4.5” Height: 1.87” |
|
Charges Ni-Cad and Li-Ion batteries.
This “DC only” version comes with
fused vehicle adapter (MBA-5630), safety strap,
and surface mounting brackets for mounting
on the floor or dashboard of a vehicle. Will
run light or charge any MBP-1200 series battery
in 2.5 hours on an 11-36 V DC source. Has drop-in
continuous maintenance charging that will keep
the battery fully charged indefinitely. Also
has a conditioning cycle that automatically
discharges the battery before charging it.
Weight: 2.6 lbs. Length: 7.5” Width:
4.5” Height: 1.87” |
|
Add “-V” to battery part numbers
above to add installed Vertical Mount Option.
For use with the MBP-1207 and the MBP-1207L. |
|
| SMART
CHARGER ACCESSORIES |
3 Amp AC Power Adapter, 100-240 VAC 50/60Hz,
for MBP-5200 Chargers. |
|
10 Amp AC Power Supply, 100-240 VAC 50/60Hz,
for MBP-5600 Chargers. |
|
Vehicle Power Adapter for MBP-5200 Series Chargers. |
|
Vehicle Power Adapter for MBP-5600 Series Chargers. |
|
| AC /DC
POWERING OPTIONS |
For connecting the searchlight directly to
a vehicle’s 12 volt system. Attaches
to and extends power cord. Contains its own
easily replaceable fuse for protection of your
vehicles electrical system.
Weight: 0.5 lbs.
Length: 10.0” Width: 1.0” Height:
1.0” |
|
Containing a weatherproof cap, this connector
is designed for hard-wire installation to a
vehicle or boat. |
|