Uses the same easy locking
method used to attach the battery module to the searchlight.
Drilled and tapped 1/4î-20 to allow attachment to standard
photographic tripods, or pan & tilt mechanisms. Made
of aluminum. (Tripod not included.)
Weight: 0.5 lbs.
Height: 0.25" Width: 3.5" Length: 6.5"
|
Utilizes the same easy locking
method used to attach the battery module to the searchlight.
Made of rugged anodized aluminum, it can be attached
to vehicles for easy searchlight access.
Weight: 0.5
lbs. Length: 6.5" Width: 3.5" Height: 2.25" |
Quickly mounts to the
top of the Maxa Beam battery and allows the searchlight
to be accurately focused and left unattended. Requires
a MBA-3600 Tripod Mount (sold separately).
Weight: 1
lb. Length: 6.5" Width: 3.5" Height: 0.5" |
Allows you to mount
your Maxa Beam to anything up to 2î wide. A removable
wedge is used to mount it to flat objects such as table
tops, window sills, doors, etc. With the wedge removed,
it can mount to round objects such as pipes and railings.
The positioning head allows you to make pan & tilt
adjustments. Requires a MBA-3600 (sold separately).
Weight: 2 lbs. Length: 3.0" Width: 2.0" Height:
2.0"
|
Allows mounting to vertical objects and
yet keep the light horizontal.
Weight: 1.1 lbs. Diameter:
0.75" Length: 10.2" Width: 4.0" |
Allows you to mount any device
that will accept a standard camera mount to the top of
the searchlight. The adjustable tilt-head permits the
imaging device to be bore-sited with the searchlights
beam.
Weight: 0.8 lbs. |
Enables you to mount
your Maxa Beam to anything up to 2.0î wide. A removable
Wedge is used to mount it to flat objects such as tabletops,
window sills, doors, etc. With the wedge removed, it
can mount to round objects such as pipes and railings.
The fluid pan/tilt head allows you to make tilt adjustments
and features an easy to grip handle for smooth panning.
Requires a MBA-3600 (sold separately).
Weight: 3.0 lbs |
Allows secure mounting to horizontal
bars and objects up to 2" wide. It features two clamps
for balance and includes the plate to which the light
can quickly be attached.
Weight: 2.6 lbs. Length: 6.5" Width:
3.75" Height: 4.0" |
Mounts to any
vehicle rooftop and allows easy snap-in of searchlight
for complete searchlight operation by remote from inside
the vehicle. User inside vehicle can pan from left to
right 385 degrees, as well as 30 degrees up from the
horizon level. Enclosure is constructed of rugged brass
and stainless steel and provides protection from sand
and wind. Please note that this is a custom-order item:
length of control shaft is made to order for correct
fit into vehicle and choice of powdercoat finish in either
black, white, or ship gray. Searchlight not included
and must be purchased separately (either MBS-430 or MBS-450
models only).
Weight: about 25 lbs. without searchlight,
Height above roof: 17.53" (control shaft length varies)
Length: 14.5" Width:
11.19" |
SEARCHLIGHT
TRIPOD MOUNT 
SEARCHLIGHT
FIXED MOUNT 
BATTERY TOP
LIGHT POSITIONER
UNICLAMP
POSITIONING HEAD 
RIGHT
ANGLE ADAPTER FOR UNICLAMP 
SEARCHLIGHT
CAMERA MOUNT 
UNI-CLAMP
FLUID PAN/TILT HEAD 
HORIZONTAL
BAR MOUNT 
REMOTE
CONTROL ROOFTOP ENCLOSURE 